[SN ED1315176] USED Edwards Edwards / E-LP-92SD Lefty Cherry Sunburst [20]

This is an Edwards LP type “E-LP-92SD” left hand model.
Flame maple top and mahogany back body with mahogany neck (set neck construction) are used for the royal specifications.
It has a thick midrange, well-balanced rise, and rich sustain as good as the original.
Seymour Duncan SH-1N pickups are mounted on the front and SH-4 on the rear. This guitar is a ready-to-play instrument for beginners and advanced players alike.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, parts replaced, and nut groove corrected, so it is in good playing condition.

There are some minor scratches, dents, and other signs of use.

Item rank: B+ (Good)

Year of manufacture: 2013
Truss rod: There is enough room.
Fret: 60-70%.
Accessories Soft case / Non-genuine
Weight 4.06kg
Serial ED1315176

Truss Rod : No problem, rod is 60 degrees to the left and right.
Fretboard: Still can withstand cutting, but the frets are low.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|44.0mm
Neck thickness(near 1st fret)|22.0mm
Neck thickness (near 12th fret)|24.5mm
SCALE|628mm (24.75″)
RADIUS|305mm (12″)
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, parts replacement, nut groove correction

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fretboard Remaining
Still can withstand cutting, but the frets are low.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
44.0mm

Neck Thickness (near 1st fret)
22.0mm

Neck Thickness (near 12th fret)
24.5mm

Scale
628mm (24.75″)

RADIUS
305mm (12″)

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, parts replacement, nut groove correction