This item is shown with images of the actual instrument and is a warehouse kept item that has not been displayed in a store. Each part of the instrument has been functionally checked by our dedicated staff prior to shipment.
Yamaha’s traditional V-shaped head
The original Yamaha FG head shape is decorated with a tuning fork logo. The truss rod cover is engraved with “Since 1966,” which indicates the origin of Yamaha guitars.
The top is made of solid Sitka spruce with A.R.E. The top is made of solid Sitka spruce. The top is made of solid Sitka spruce with A.R.E. The rich sound of a brand new instrument, as if it has been played for many years, and the warm mid-low range of mahogany wood give it a powerful resonance. The cohesive sound is ideal for chord strokes or rhythmic fingerstyle playing.
The side and back are made of solid mahogany. The side and back are made of solid mahogany for a warm and rich midrange that is unique to mahogany.
The scalloped bracing used in the FG/FS#800 series has been improved through a combination of pseudo prototyping using the latest acoustic analysis simulation technology and prototyping by woodworkers. The scalloped bracing used in the FG/FS#800 series has been optimized to match the characteristics of the wood itself and the FG and FS models to achieve further expansion of the low frequency range.
Yamaha’s proprietary Acoustic Resonance Enhancement (A.R.E.) process is applied to the surface plate. By precisely controlling temperature, humidity, and atmospheric pressure, the same changes that occur over time in lumber after it has been milled are produced in a short period of time, thereby improving sound transmission and vibration efficiency. A.R.E. processing produces a warm, matured sound with good balance and few annoying overtones, making it sound like a guitar that has been played for many years.
The newly developed “Atmosfeel” pickup system is installed.
The newly developed Atmosfeel 3-way pickup system consists of three different pickups that reliably capture each frequency range: a piezo sensor in the undersaddle for the mid and low frequencies, a microphone in the preamp for the low frequencies, and a proprietary, extremely thin contact sensor for the high frequencies. By adding a contact sensor made of thin and durable piezoelectric synthetic paper inside (near the back of the bridge), we were able to reproduce the cohesiveness of string vibrations coming out of the soundhole, the lingering sound of each string, the touch feeling when fingering, and the airy and delicate sound brought by the overtone component in the upper register, which conventional pickups could not pick up. and delicate sounds brought about by overtone components in the high frequency range. The sound of an acoustic guitar is reproduced as it is when played live on the line.
Accessories: Light case, wrenches
Serial number: IKN241045
* The color and brightness may look slightly different depending on the monitor environment. Please understand that the color and brightness may slightly differ depending on the monitor environment.
specs
Body type
Traditional Western type
Body length
505mm
Body width (max.)
412mm
Body thickness
100-118mm
String length
634mm
total length
1029mm
Fingerboard width (upper bridge/body joint)
44mm/55mm
Table Plate(Front)
Solid Sitka spruce A.R.E.
Bracing Shape
Scalloped bracing
Back Board
Solid Mahogany
Sideboard
Solid mahogany
neck
mahogany
Fingerboard
ebony or striped ebony
Pieces
ebony or striped ebony
Pillow for lower bridge
ebony or ebony striped ebony
Spool of thread
Crewsong open gear (Y1D)
Upper Piece
Urea
Paint
Semi-gloss finish
Pickup System
SYSTEM74 (Hybrid 3-way system) Atmosfeel
Controller
EQ(Bass)/Master Volume/Mic Blend
Reviews
There are no reviews yet.