This model is a reproduction of the MG-X Custom Cherry Sunburst, which represents the Hide model.
The graphic flame top basswood body is bolted on to a maple neck.
It is equipped with one volume, 3-way selector and direct switch.

It has many signs of use such as scratches, dings, peeling paint, dull parts, and rust.
A slight sound jamming can be felt at the high frets.

Item Rank: B+: Some scratches, but no problems in normal use.

Case: Non-genuine soft case
Weight: 3.17kg
Truss Rod: No problem, rod checked to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.5mm
Neck thickness near 1st fret: 20.2mm
Neck thickness near 12th fret: 22.0mm
SCALE: 628mm (24.75″)
RADIUS: 305mm (12″)
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

Specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Case
Non-genuine soft case

Weight
3.17kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.5mm

Neck thickness near 1st fret
20.2mm

Neck thickness near 12th fret
22.0mm

Scale
628mm (24.75″)

RADIUS
305mm (12″)

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

Reviews

There are no reviews yet.

Be the first to review “USED Burny / MG-85X Cherry Sunburst [11]”

Your email address will not be published. Required fields are marked *