The EZ-PA20 is a stereo audio amplifier with one line input and a front-panel volume control. An integral compressor/limiter allows a higher sound output level without clipping than is possible using a standard amplifier. The output drives 4 or 8 ohm speakers. The EZ-PA20 is used in houses of worship, restaurants, clubs, meeting rooms, educational facilities, conference rooms and commercial sound systems.

Features

  • Audio Amplifier with Front-Panel Level Control
  • 10 Watts RMS Per Channel into 8
  • 8 Watts RMS Per Channel into 4
  • Switch-Selectable Load Impedance on Rear Panel
  • Unbalanced Line Input on RCA Jacks
  • Switch-Selectable Mono or Stereo Mode
  • Integral Overload Limiter with LED Indicator
  • Limiter Controls Overloads from Clipping
  • Limiter Produces Output Level Comparable to Higher Power Amps
  • Mono Mode Switch Sums Left and Right Inputs

Specifications

Input: > 10 k, -10 dBV nominal on RCA jacks, -13 dBV Min. (for 10 W out), +22 dBV max.
Gain: Off to 32 dB
Outputs (2): Left and Right, 10 Watts RMS into 8 per channel or 8 Watts RMS into 4 per channel, switchselectable output impedance
Frequency Response: 35 Hz to 20 kHz (1.5 dB, 10 Watts)
THD+N: < 0.25%
Crosstalk: < -68 dB (1 kHz)
Noise: < -70 dB (below 10 Watts)
24 Vdc power supply current: 160 mA (idle), 1000 mA (max.)
Case dimensions: 5.75 (14.6 cm)W x 5 (12.7 cm)D
Mounting size: 1/3 rack width
Package Type: Cardboard Box
Tariff code: 8518.50.0000
WEEE weight: 0.945 lbs.
Shipping Weight: 1.365 lbs.
Package Dimensions: 9.5 x 7 x 2.25 in.

Reviews

There are no reviews yet.

Be the first to review “RDL EZ-PA20 Stereo Audio Amplifier with Power Supply – 20W”

Your email address will not be published. Required fields are marked *