Galaxy Audio AXS-14 14-Input Analog Audio Mixer

Key Features

• 14-Input Professional-Quality Mixer
• Feedback Detection System
• 9-Band Stereo Graphic EQ
• Voice Canceller Function
• 6 Microphone Preamps
• 6 Compressors
• 3-Band EQ on Mono Channels
• 4-Band EQ on Stereo Channels
• 24-Bit Multi-Effects Processor
• USB Audio Interface

TheAXS-14fromGalaxy Audiois a 14-input analog audio mixer featuring premium-quality mic preamps, stereo line inputs, compressors, EQs, a 24-bit multi-effects processor, and an integrated USB audio interface. Additional features include an on-board 9-band stereo graphic EQ, feedback detection circuit, voice canceller function, and a dedicated monitor output.

Inputs 1-6 on the AXS-14 provide a 1/4″ line input or XLR microphone preamp with phantom power (+48V), a compressor, a 3-band EQ with a sweepable mid, a gain-trim knob, and a high-pass filter. Inputs 7-14 offer mono/stereo 1/4″ line inputs, a +4/-10 dB level selection button, and a 4-band fixed frequency EQ. All channels feature 60mm logarithmic faders, pan, mute, two aux sends with stereo returns, switchable solo/pre-fader listen (PFL) buttons, and routing options for main and sub outputs.

The 9-band stereo EQ features LEDs on each frequency band that work in conjunction with the feedback detection system. As feedback is detected, the LED lights up indicating which EQ bands to attenuate. The EQ and feedback detection circuit are switchable between the main mix and monitor output. The voice cancellation function removes vocals from stereo tracks, which is ideal for karaoke applications. A monitor send is available on each channel and features a dedicated 60mm fader for the master monitor level control.

The multi-effects processor features 24-bit AD/DA converters and offers 16 presets producing professional-quality reverb, delay, and modulation effects. The on-board switch-mode power supply provides an optimum current supply regardless of input voltage and offers higher efficiency when compared to conventional power supplies. The AXS-14 ships with a standard IEC power cord.

• 6 XLR mic inputs
• 4 Stereo inputs
• 6 Phantom powered (+48V) mic preamps
• 6 Built-in compressors
• 3-Band EQ with sweepable mids per mono channel
• 4-Band fixed-frequency EQ per stereo channel
• 16 Effects with tap tempo
• USB audio interface
• Voice canceller function
• Feedback detection system
• On-board 9-band stereo graphic EQ
• 6 Channel inserts
• 2 AUX sends per channel with stereo returns
• Dedicated monitor output
• PFL on each channel
• Balanced main outputs
• Headphone output
• Control room controls
• 60 mm logarithmic faders
• Sealed rotary controls
• Switch-mode power supply

Galaxy Audio AXS-14Specs

Inputs & Outputs

Inputs	Inputs 1-6: 6 x Balanced XLR or 6 x 1/4″ Inputs 7-14: 8 x 1/4″ Aux Returns: 4 x 1/4″ 2TK/USB: 2 x RCA DSP Mute Switch: 1/4″ Insert Send/Return: 4 x 1/4″
Outputs	Main: 2 x XLR, 2 x 1/4″ Sub: 2 x 1/4″ Control Room: 2 x 1/4″ Aux Send: 2 x 1/4″ Monitor: 1 x 1/4″ Phones: 1 x 1/4″ 2TK/USB: 2 x RCA

Microphone Inputs

Microphone Type	XLR Electronically Balanced Discrete Input Circuit
Mic Input Noise (E.I.N.)	Mic E.I.N (20 Hz to 20 kHz): @ 0 ohm Source Resistance: -134 dB / 135.7 A-weighted @ 50 ohms Source Resistance: -131 dB / 133.3 dB A-weighted @ 150 ohms Source Resistance: -129 dB / 130.5 dB A-weighted Frequency Response: <10 Hz to 150 kHz (-1 dB), <10 Hz to 200 kHz (-3 dB) Gain Range: +10 to +60 dB Maximum Input Level: +12 dBu @ +10 dB gain Impedance: Approximately 2.6 kOhms balanced Signal to Noise Ratio: 110 dB / 112 dB A-weighted (0 dBu in @ +22 dB gain) Distortion (THD+N): 0.005% / 0.004% A-weighted
Line Input	Type: 1/4″ TRS connector electronically balanced Impedance: Approximately 20 kOhms balanced, 10 kOhms unbalanced Gain Range: -10 to +40 dB Maximum Input Level: 30 dBu

Fade-out Attenuation

Crosstalk / Attenuation

Main Fader Closed: 90 dB Channel Muted: 89 dB Channel Fader Closed: 89 dB

Frequency Response

Microphone Input	Microphone Input to Main Out: <10 Hz to 90 kHz +0 dB / -1 dB <10 Hz to 160 kHz +0 dB / -3 dB
Stereo Input	Type: 1/4″ TRS Connector, electronically balanced Impedance: Approximately 20 kOhms Maximum Input Level: +22 dBu
EQ Type Mono Channels	Low: 15 dB shelving at 80 Hz Mid: 15 dB peak, sweepable from 100 Hz to 8 kHz High: 15 dB shelving at 12 kHz
EQ Type Stereo Channels	Low: 15 dB shelving at 80 Hz Low-Mid: 15 dB peak at 500 Hz High-Mid: 15 dB peak at 3 kHz High: 15 dB shelving at 12 kHz
AUX Sends	Type: 1/4″ TS connector, unbalanced Impedance: Approximately 120 Ohms Maximum Input Level: +22 dBu
AUX Returns	Type: 1/4″ TRS connector, electronically balanced Impedance: Approximately 20 kOhms balanced / 10 kOhms unbalanced Maximum Input Level: +22 dBu
Main Outputs	Type: XLR electronically balanced and 1/4″ TRS balanced Impedance: Approximately 240 Ohms Symm. / 120 Ohms unbalanced Maximum Output Level: +28 dBu
Control Room Outputs	Type: 1/4″ TS connector unbalanced Impedance: Approximately 120 Ohms Maximum Output Level: +22 dBu
Headphone Output	Type: 1/4″ TRS connector, unbalanced Maximum Output Level: +19 dBu / 150 Ohms (+25 dBm)
Meter	3-color LED

DSP

Converter	24-bit Sigma-Delta 64/128 times oversampling
Sampling Rate	40 kHz

USB

USB	Audio: Stereo in/out Connector: Type B Converter: 16-bit Sample Rate: 48 kHz

Main Mix

Noise	Main Mix @ / Channel Fader @ : -101 dB Main Mix @ 0 dB / Channel Fader @ : -93 dB Main Mix @ 0 dB / Channel Fader @ 0 dB: -81 dB
Power / Consumption	Power Supply: 100-240 VAC, 50/60 Hz Power Consumption: 50 W
Fuse	Fuse: T 1.6 A, 250 V
Dimensions	4.7 x 19.1 x 17.4″ / 11.8 x 48.3 x 44.3 cm
Weight	15.0 lb / 6.8 kg

Packaging Info

Package Weight	17.1 lb
Box Dimensions (LxWxH)	21.1 x 21.1 x 7.8″