[SN 240420] USED CHARVEL / MODEL 2M Red [12]

The Dinky has simple specifications typical of the 80s.
The ST-shaped body is equipped with one humbucker pickup, a Kahler Fulcrum bridge, and one volume.
The Concorde head, in the vein of Jackson guitars, is bolted on to a slim neck with jumbo frets.
Equipped with the original high-output “J90C” pickups, this model is ideal for hard riffs and technical solo phrases.

There are some minor scratches and dents scattered throughout, and the metal parts are slightly dull.
A protective sheet is stuck to the control panel on the back of the body and cannot be removed.
The neck is a little wavy, and the frets are low due to rubbing, but there is no fretting or stuck sound, so there is no problem in playing.
Although the neck is a little used, it has been maintained and cleaned at our repair center, and is in good playability condition.
The arm is missing.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 240420
Year of manufacture: 1980s
Case: Non-authentic soft case
Weight: 3.58kg
Truss Rod: No problem (slight waviness), rod is checked up to 60 degrees to the left and right.
Fret Remaining: Still can be cut, but the frets are low.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.1mm
Neck thickness near 1st fret: 18.7mm
Neck thickness near 12th fret: 22.0mm
SCALE: 648mm (25.5″)
RADIUS: 254mm (10″)
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment

Specs: Percentage (%)

Item Rank
B+: Some scratches, but no problem for normal use.

12 months old

Serial No.
240420

Year of manufacture
1980s

Case
Non-Genuine Soft Case

Weight
3.58kg

Truss Rod
No problem (slight waviness)

Fret Remaining
Still can withstand cutting, but the frets are low.

String height on the bass string side
2.0mm above the 12th fret

High string side
1.5mm above the 12th fret

Nut width
43.1mm

Neck thickness near 1st fret
18.7mm

Neck thickness near 12th fret
22.0mm

Scale
648mm (25.5″)

RADIUS
254mm (10″)

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment