The Orville was made in Japan, inheriting the specifications of the original Gibson, and is highly regarded both in Japan and overseas.
The body is made of maple top and mahogany back, and the mahogany neck (deep joint) is used for the royal specifications.
The clear sound of the original humbuckers (made in Japan) with moderate output shows its true value in clean and crunchy distortion, making it easy to handle regardless of genre.
The condenser has been replaced with an orange drop.
* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and fret grated, so it is in good playing condition.
Pick guard is missing.
There are many dents with paint chips on the top of the head, and there are many dents on the body back with paint dents, chips, and some wood dents.
There are also scratches and minor dents throughout.
Item rank: B+ (Good)
Year of manufacture: Made in 1995
Truss rod: There is enough room.
Fret: 60-70%.
Accessories: soft case/not genuine
Country of Origin Japan
Weight 4.00kg
Serial 509162
Truss Rod : No problem, rod is 60 degrees to the left and right.
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.5mm
Neck thickness(near 1st fret)|21.2mm
Neck thickness (near 12th fret)|25.3mm
SCALE|628mm (24.75″)
RADIUS|305mm (12″)
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment
* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.
specs
Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.
Remaining frets
No problem, there is enough fret height.
String height (bass string side)
2.0mm above 12th fret
String height (treble string side)
1.5mm above 12th fret
Nut Width
43.5mm
Neck Thickness (near 1st fret)
21.2mm
Neck Thickness (near 12th fret)
25.3mm
Scale
628mm (24.75″)
RADIUS
305mm (12″)
Strings for setup
ERNIE BALL 2221 / .010-.046 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment
Reviews
There are no reviews yet.