Domestic LPC replica models of yesteryear are now in stock.
This is a Fernandez LPC replica model that was manufactured and sold under the Burny brand.
Based on the design of the split diamond inlay on the head top, we have determined that it is an individual until 1988.
The body back is mahogany, but the body top is either maple or mahogany. The color and texture of the wood, which can be seen through the pickup cavity and escutcheon screw holes, suggest that mahogany was used.
It has a mahogany neck and rosewood fingerboard with 22 frets, and is painted with a candy-colored topcoat like Black Beauty.
Even though it is a replica model, you can feel the quality of the construction that can only be achieved in Japan.
The pegs have been replaced with GOTOH pegs, and the control knobs have been replaced with sombrero knobs.
There is a possibility that the rear pickup cover has also been replaced.
There is a small ding on the head top, and the body as a whole has numerous scratches and dings scattered throughout.
The metal parts are dull, rusty, and the plating is peeling, but there are no problems with use.
Although there is a sense of use, each part has been maintained and cleaned at our repair center, and playability is good.
Item Rank: B+: Some scratches, but no problem in normal use.
Serial Number: –
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 4.07kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.2mm
Neck thickness near 12th fret: 24.9mm
SCALE: 628mm (24.75″)
RADIUS: 305mm (12″)
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Modification: Pegs Knobs
Repair and Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment
Specs
Item Rank
B+: Some scratches, but no problem for normal use.
12 months old
Serial No.
Serial number is “A
Country of manufacture
Japan
Case
Non-genuine soft case
Weight
4.07kg
Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.
Fret Remaining
No problem, there is enough fret height
String Height Low String Side
2.0mm above 12th fret
String height on treble string side
1.5mm above the 12th fret
Nut width
43.0mm
Neck thickness near 1st fret
21.2mm
Neck thickness near 12th fret
24.9mm
Scale
628mm (24.75″)
RADIUS
305mm (12″)
Strings for setup
ERNIE BALL 2221 / .010-.046 set
Modified part
Pegs Knobs
Repair and Maintenance
Cleaning, string change, rod adjustment, octave adjustment, string height adjustment
Reviews
There are no reviews yet.