Basic model with Sustainer Lite
Soft maple body with maple neck and rose fingerboard.
The sustainer driver with hole-piece design functions as both a sustainer and a pickup.
There are scratches, dents, dull parts, rust, and other signs of use.
A strap pin is also attached at the joint.
The neck is in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.
Case: non-genuine soft case
Accessories: Arm
Weight: 3.72kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.7mm
Neck thickness near 1st fret: 20.2mm
Neck thickness near 12th fret: 21.4mm
SCALE: 648mm (25.5″)
RADIUS: 305mm (12″)
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment
specs
Item Rank
B+: Some scratches, but no problem for normal use
12 months old
Case
Non-genuine soft case
Accessories
Arm
Weight
3.72kg
Truss Rod
No problem, rod checked up to 60 degrees to the left and right
Fret Remaining
No problem, there is enough fret height
String Height Low String Side
2.0mm above 12th fret
String height on treble string side
1.5mm above the 12th fret
Nut width
41.7mm
Neck thickness near 1st fret
20.2mm
Neck thickness near 12th fret
21.4mm
Scale
648mm (25.5″)
RADIUS
305mm (12″)
Strings for setup
ERNIE BALL 2223 / .009-.042 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
Reviews
There are no reviews yet.